Lab consumables

Ceramic Firing Paste (Peg Putty)A firing paste for supporting restorations in the furnace. The restoration is held during firing so it neither shifts nor sticks to the tray, and the support comes away easily once cool.LoddenLab consumables 3D Scanning Developer PasteA scanning paste for glossy or translucent surfaces. A thin, even layer scatters the light so the scanner can read the surface — the answer to polished metal, glass-ceramic and clear models that throw glare and confuse the camera.LoddenLab consumables Casting Investment RingAn investment ring for casting and pressing. The ring holds the investment around the wax pattern until it sets, and its size decides how many units fit in one cycle.LoddenLab consumables Soft Ceramic Firing PadA soft firing pad for the furnace tray. The restoration rests on soft fibers that let it contract and expand without local stress, which means fewer distortions and fewer cracks through firing.LoddenLab consumables Casting Knockout PinA knockout pin for releasing the casting from the investment. It delivers the blow at a controlled point, so the casting comes out without distortion or cracking — better than striking the work directly.LoddenLab consumables Glaze & Stain Brush PenA brush pen for glazing and staining. It holds the paste and releases it at an even rate, so the layer stays thin and consistent — one pen per shade keeps colors from mixing.LoddenLab consumables Press Plunger SeparatorA separator for the press plunger. A thin film on the plunger stops it sticking to the investment and to glass-ceramic residue, so it withdraws clean and can be used again.LoddenLab consumables Round Ceramic Sintering TrayA round ceramic sintering tray for the zirconia furnace. It withstands sintering temperatures and does not react with zirconia, so the restoration is neither discolored nor stuck to the tray.LoddenLab consumables Honeycomb Sintering Tray with Ceramic PinsA round honeycomb sintering tray with ceramic pins. The pins hold crowns and bridges at the chosen angle so heat reaches every side while the support touches the smallest possible area — fewer contact marks on the restoration.LoddenLab consumables