INOX N1 LED & Nitrogen Curing Machine
INOX
A post-curing unit for printed parts, with LED light and nitrogen flow. A part that leaves the printer is not finished: its outer layer stays soft and tacky because atmospheric oxygen halts polymerization at the surface. Nitrogen displaces that oxygen from the chamber, so the cure reaches the surface too — the result is stronger, more color-stable and, above all, not tacky. Chamber lit from both sides, with stored time programs. Installed by JK Dent, with training and ongoing service.
- Supply, installation and staff training by JK Dent
- Full warranty
- Service and maintenance — response within 24 hours
More in this category
HeyMill W19Five-axis wet milling machine for hard materials: grade-5 titanium, cobalt-chrome, glass-ceramics and polymers. Two spindle modes — quick and high-power — move it between fine finishing and metal cutting on the same machine. It takes round discs, blocks and pre-milled titanium columns, and is aimed at angled multi-unit abutments and precision screw-retained work. JK Dent installs it in the lab, trains the team and services it.
HeyMill D18Five-axis dry milling machine with no compressor — the lab needs no compressed-air infrastructure. A 60,000 rpm spindle, an automatic ten-bur changer and milling accuracy down to one micron. It monitors bur life, alarms on breakage, and resumes from the breakpoint after an interruption, so a whole disc is not lost mid-job. JK Dent installs it in the lab, trains the team and services it.
W16Five-axis hybrid milling machine — wet and dry in one unit, so a single lab covers zirconia, wax, resin, glass-ceramics, titanium, pre-milled blanks and soft metals without splitting the work between two machines. High-power water-cooled spindle, tool-life monitoring and job recovery after a power cut. Compatible with mainstream CAM systems. Supply, installation, staff training and maintenance by JK Dent.
HeyTemp TSTS-series zirconia sintering furnace with high-purity Elema heating elements. It pre-dries the restoration and clears residual moisture before the sintering cycle, so no preheating is needed and work can go straight in. Fast and slow sintering are combined; in fast mode — with silicon-carbide heating rods — sintering time drops to about an hour. Up to 150 units per cycle, with no metal-ion contamination. Supply, installation, staff training and maintenance by JK Dent.
Contact us
A site visit, measurements and an initial plan with a price range — no obligation.
Leave a detailed message
Even outside business hours — we will get back to you.